Hot Sell Large Schedule 40 ASTM A53 Gr. B Smls Carbon Steel Pipe Used for Oil and Gas Pipeline

• After-sales Service: 24 Hours Online
• Warranty: 1 Year
• Type: Seamless
• Technique: Hot Rolled
• Material: Carbon Steel
• Surface Treatment: Black
• Usage: Pipeline Transport, Hydraulic/Automobile Pipe, Machinery Industry, Chemical Industry, Construction & Decoration, Pipeline Transport, Boiler Pipe, Hydraulic/Automob
• Section Shape: Round
• Product Name: Seamless Carbon Steel Pipe
• Materil: Q195-Q345, Q235, Q195 Q235B
• Size: (Od)10-1219/10*10-600*600/10*20-800*400
• Wall Thickness: 0.6-30mm
• Length(mm): 5.8m, 6m, as Customers Requirement
• Certificates: API ISO9001-2008, SGS.BV
• Standard: BS1387, ASTM A53, API 5L, En10219
• Quality Tests: Material Testing, Zinc Test, Mechanical Properties I
• Transport Package: Bundle, or with All Kinds of Colors PVC or as Your
• Specification: 20mm-1219mm
• Origin: China
• HS Code: 7304111000
• Production Capacity: 100000pices/Year

Product Description

Hot Sell Large schedule 40 ASTM A53 Gr. B SMLS carbon steel pipe used for oil and gas pipeline

 

Product Description

Seamless pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow - liquids and gases (fluids), slurries, powders and masses of small solids.

1.Steel Tubing is a hollow steel shape intended for structural purposes and made from carbon, stainless, or galvanized steel further divided as:
·Mechanical Tubing is used in low stress applications such as fences, kitchens, restaurants, hospitals, solar panels and made with wall thicknesses up to 10 gauge.
·Structural Tubing is for high stress structural application like bridges, buildings, roll cages, and underwater platforms with wall thickness from 3/16" and up. It is often referred to as Hollow Structural Sections or just the acronym HSS.
2.Pipe is a hollow structure that is intended to carry material such as liquids, gasses, or even solids. Its wall thickness is described by its Schedule and it is often broken down by type using the method of manufacturing it, either ERW or Seamless.
Seamless Pipe (and tubing) is made by extruding a steel block or by drilling a solid steel bar. Next, the extrusion or the drilled steel bar is cold drawn through a dye to achieve the diameter and thickness needed. Because this process can cause mechanical hardening, sometimes the material is annealed and straightened as a final process. Seamless Pipe & Tubing is subdivided as:
Cold Drawn Seamless, or CDS, exhibits precise tolerances and a good surface finish.
Hot Finished Seamless, or HFS, has less critical tolerances and somewhat scaly finish and is not as strong as CDS.

 

 

Standard	API, ASTM, BS, DIN, GB, JIS
Outer Diameter	21.3mm-660mm
Wall Thickness	0.5mm-20mm
Dia Tolerance	Control with in the standard, OD:±1%, WT:±10%
Materials	10#, 20#, 45#, Q235, Q345, Q195, Q215, SS400, ASTM A53/A106/A178/A333/A335, ST37, ST37-2, DIN 1629 ST35, ST45, ST52, DIN 17175 ST35.8, DIN 17175 19Mn5, 16Mn, Q345B, T1, T2, T5, T9, T11, T12, T22, T91, T92, P1, P2, P5, P9, P11,P12, P22, P91, P92, 15CrMo, Cr5Mo, 10CrMo910, 12CrMo, 13CrMo44, 30CrMo, GR.1, GR.3, GR.6, GR.7, Gr.B, X42, X46, X52, X60, X65, X70, X80, X100
Zinc coating	Pre galvanized steel pipe: 60-150g/m² Hot dipped galvanized steel pipe: 200-400g/m²
Type of pipe coating	Epoxy powder
Inspection	ISO, BV, SGS, MTC
Packing	Steel strip packed. Standard Export Seaworthy Package. Suit forall kinds of transport,or as required
Application	Accessorize, machinery parts, structure steel pipe, piling pipe, sewage and clear water transportation, Line pipe for petroleum and so on
MOQ	5metric ton,sample order accepted
Shipment time	Within 7-10 workdays after receiving deposit or L/C
Market	Southeast Asia, Middle East, Africa, Europe, South American and so on

 

Descriptions	Grades	Standard	Specification (OD*WT)mm	Usage
Structural steel pipe	20# 35# 45# Q345B, 16Mn, Q345B-E, 20Mn2, 25Mn, 30Mn2, 40Mn2, 45Mn2, SAE1018, SAE1020, SAE1518, SAE1045.	GB/T8162-2008	6-1020*1.5-100	For commom structure
Fluid steel pipe	10#, 20#, ASTM A106, A210, A53, 16Mn, Q345A.B.C.D.E, Q295B.C.D.E	GB/T8163-2008	8-630*1.0-40	Fluid feeding
High pressure boiler pipe	20G, 15MnG, 20MnG, 15CrMoG, 12Cr1MoVG, St35.8, St45, SA106b, SA106c, SA210a, SA210c, A335P2, P11, P12, P22, P91, P92, A213 T2,T9, T11, T12, T22, T23, T91	GB/5310-2008, ASTM A 106-99, DIN 17175-79	14-630*2-80	Temperature-resistant seamless steel pipe far high-pressure boiler
Oil casing pipe	API SPEC 5CT J55, K55, N80, L80, C90, C95, P110	API SPEC 5CT, SY/T6194-96, GB/T222-84,	10-530*1.5-36	Boiler pipes for refinery,heatexchangeing pipes,seamless steel pipes for pipeline
Pipeline	API SPEC 5L, X42, X52, X60, X65,X70,X80 ASTM A53, ASTM A106, ASTM A333, BS301, BS3602, BS3603, BS3604, PSL1, PSL2, DNV-OS-F101, CSA-Z245	API SPEC 5L, ISO 3183, GB/T 9711	60-630*1.5-40	Carrying gas,water or oil in the industries of petroleum and natural gas
Alloy steel pipe	4140, 42CrMo, 32CrMo, 15CrMo, Cr5Mo, 13CrMo44, 12Cr1MoV P22 T91,P91,P9, T9, Wb36	GB5310-95, GB9948-88, ASTM A335/A335M, ASTM A213/213M, DIN17175-79, JISG3467-88, JISG3458-88	16-824*2-100	The seamless steal pipes features resistance to high presure,high/low temperature  and corrosion ano is used  in the industries of petroleum, chemical engineering and. Electric pwer as well as boiler
Hydraulic prop pipe	20#, 45#, 27SiMn, 30CrMoSiA	GB/T17396-2009	70-377*9-40	Coal mine hydraulic support and pillar cylinder, column, can also be used for other hydraulic cylinder, column

ASTM A106 Seamless steel pipe

Grade	Chemical Compositions
	C	Mn	P	S	Si	Cr	Cu	Mo	Ni	V
A106-A	≤0.25	0.27-0.93	≤0.035	≤0.035	≥0.10	≤0.40	≤0.40	≤0.15	≤0.40	≤0.08
A106-B	≤0.30	0.29-1.06	≤0.035	≤0.035	≥0.10	≤0.40	≤0.40	≤0.15	≤0.40	≤0.08
A106-C	≤0.35	0.29-1.06	≤0.035	≤0.035	≥0.10	≤0.40	≤0.40	≤0.15	≤0.40	≤0.08
Grade	Mechanical Properties
	Tensile Strength(Mpa)			Yield Strength(Mpa)			Elongation(%)
A106-A	≥330			≥205			30
A106-B	≥415			≥240			30
A106-C	≥485			≥275			30

 

Chinese Standard	American Standard	German Standard
10#	ASTM A53-A	St37	DIN1626
	ASTM A106-A	St37-2	DIN17175
	ASTM A179-C	St35-8	DIN17175
20#	ASTM A53-B	St42-2	DIN1626
	ASTM A106-B	St45-8	DIN17175
	ASTM A178-C	St45-4	DIN1629/4
45#	ASTM A 1045	CK45
16Mn	ASTM A210-C	St52	DIN1629/3
		St52.4	DIN1629/4

ASTM A53 Carbon Steel Pipe & Tube
ASTM A53 (ASME SA53) carbon steel pipe is a specification that covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8″ to NPS 26.  A 53 is intended for pressure and mechanical applications and is also acceptable for ordinary uses in steam, water, gas, and air lines.
A53 pipe comes in three types (F, E, S) and two grades (A, B).
A53 Type F is manufactured with a furnace butt weld or may have a continuous weld (Grade A only)
A53 Type E has an electric resistance weld (Grades A and B)
A53 Type S is a seamless pipe and found in Grades A and B)
A53 Grade B Seamless is our most polar product under this specification and A53 pipe is commonly dual certified to A106 B Seamless pipe.

Grade	Chemical Composition (%) Max.
	C	Mn	P	S	Cu	Ni	Cr	Mo	V
A	0.25	0.95	0.05	0.045	0.4	0.4	0.4	0.15	0.08
B	0.30	1.20	0.05	0.045	0.4	0.4	0.4	0.15	0.08

Grade	Mechanical Properties
	Tensile Strength (Mpa)	Yield Strength (Mpa)
A	≥48,000 (≥330)	≥30,000 (≥205)
B	≥60,000 (≥415)	≥35,000 (≥240)

ASTM A53 steel pipe of size range

NPS	OD	W T
INCH	MM	SCH10	SCH20	SCH30	STD	SCH40	SCH60	XS	SCH80	SCH100	SCH120	SCH140	SCH160
1/2″	21.3	2.11		2.41	2.77	2.77		3.73	3.73				4.78
3/4″	26.7	2.11		2.41	2.87	2.87		3.91	3.91				5.56
1″	33.4	2.77		2.9	3.38	3.38		4.55	4.55				6.35
1.1/4″	42.2	2.77		2.97	3.56	3.56		4.85	4.85				6.35
1.1/2″	48.3	2.77		3.18	3.68	3.68		5.08	5.08				7.14
2″	60.3	2.77		3.18	3.91	3.91		5.54	5.54				8.74
2.1/2″	73	3.05		4.78	5.16	5.16		7.01	7.01				9.53
3″	88.9	3.05		4.78	5.49	5.49		7.62	7.62				11.13
3.1/2″	101.6	3.05		4.78	5.74	5.74		8.08	8.08
4″	114.3	3.05		4.78	6.02	6.02		8.56	8.56		11.13		13.49
5″	141.3	3.4			6.55	6.55		9.53	9.53		12.7		15.88
6″	168.3	3.4			7.11	7.11		10.97	10.97		14.27		18.26
8″	219.1	3.76	6.35	7.04	8.18	8.18	10.31	12.7	12.7	15.09	18.26	20.62	23.01
10″	273	4.19	6.35	7.8	9.27	9.27	12.7	12.7	15.09	18.26	21.44	25.4	28.58
12″	323.8	4.57	6.35	8.38	9.53	10.31	14.27	12.7	17.48	21.44	25.4	28.58	33.32
14″	355.6	6.35	7.92	9.53	9.53	11.13	15.09	12.7	19.05	23.83	27.79	31.75	35.71
16″	406.4	6.35	7.92	9.53	9.53	12.7	16.66	12.7	21.44	26.19	30.96	36.53	40.19
18″	457.2	6.35	7.92	11.13	9.53	14.27	19.05	12.7	23.83	39.36	34.93	39.67	45.24
20″	508	6.35	9.53	12.7	9.53	15.09	20.62	12.7	26.19	32.54	38.1	44.45	50.01
22″	558.8	6.35	9.53	12.7	9.53		22.23	12.7	28.58	34.93	41.28	47.63	53.98
24″	609.6	6.35	9.53	14.27	9.53	17.48	24.61	12.7	30.96	38.89	46.02	52.37	59.54
26″	660.4	7.92	12.7		9.53			12.7
28″	711.2	7.92	12.7	15.88	9.53			12.7

Pipe Grades:
A53 - ATSM A53 is a carbon steel alloy, used mostly for low pressure plumbing  and comes in 3 types:
A53 Type F - Longitudinally furnace butt welded or continuous welded
A53 Type E - Longitudinally electric resistance welded (ERW)
A53 Type S - Seamless pipe
A106B - ASTM A 106 seamless pressure pipe, (ASME SA106 pipe) used in the  construction of oil and gas refineries, power plants, and boilers.
A500B - Seamless carbon steel structural tubing in round, square and  rectangular shapes. (HSS)
API 5L - Standards for pipe suitable for use in conveying gas, water, and oil  in the natural gas and oil industries.
X52 - Welded pipe, widely used in petroleum and natural gas industries.
4130 - An alloy pipe often used int he Oil and Gas industries.
Other Pipe and Tubing Terms of Interest:
BPE - Black Plain End Pipe
BTC - Black Threaded & Coupled
GPE - Galvanized Plain End
GTC - Galvanized Threaded & Coupled
TOE - Threaded One End
Typical Pipe Coatings & Finishes:
Galvanized - Covered with a protective zinc coating on steel to prevent the  material from rusting. The process can be hot-dip-galvanizing where the material  is dipped in molten zinc or Electro-Galvanized where the steel sheet from which  the pipe is made was galvanized during production by an electro-chemical  reaction.
Uncoated - Uncoated Pipe
Black Coated - Coated with a dark colored iron-oxide
Red Primed - Red Oxide Primed used as a base coat for ferrous metals, gives  iron and steel surfaces a layer of protection

 

Detailed Photos

 

 

 

Packaging & Shipping

1) Minimum order quantity: 20 tons 

2) Price: FOB or CIF or CFR at aXin'gang port in Tianjin

3) Payment:  30% deposit in advance, the balance against the copy of B/L; or 100% L/C, etc

4) Lead Time: within 10-25 workdays normally 

5) Packing: Standard seaworthy  packing or as per your request .(as pictures)

6) Sample: Free sample is avaible.

7) Individual Service: can print your logo or brand name on  steel pipe/carbon steel pipe/ pe coated steel pipe.

20ft GP: 5898mm(Length)x2352mm(Width)x2393mm(High)

40ft GP: 12032mm(Length)x2352mm(Width)x2393mm(High) 

40ft HC: 12032mm(Lengh)x2352mm(Width)x2698mm(High)

20 feet container load 25 tons steel pipe/carbon steel pipe/ steel pipe manufacturer whose length is under 5.8m.

40 feet container load 25 tons steel pipe/carbon steel pipe/ steel pipe manufacturer whose length is under 11.8m.

Company Profile

Our company is a located in Jinghai County,Tianjin,we are a professional and reputable steel manufacturer and exporter in China.

We have the professional team and excellent workers aim at supply best service and products for all of our customers. producing and offering our clients welded steel pipes, galvanized steel pipes, color and galvanized steel coils other related products.Products are many exported to South America,Europe,Southeast Asia and Africa.

Since the mill was established in 2007, we have been adopting advanced production equipment to improve the quality of products,reduce the cost of producing ,we have the good production environment now, covers an area of 15,000 square meters with advanced production equipment,precision testing instruments.

Our factory has the annual production capacity Generally, our products are widely applied in construction, bridge, car manufacturing, electrical installation and mining.
 

Our services

1.High quanlity and competitive price.

2.Customized on-demand.

3.Reasonable shipping and fast delivery.

4.Free sample.

5.Our company professional quality testing team and any third party testing.

Application

FAQ

Q: Are you a manufacturer?
A: Yes , we are a manufacturer, We have own factory, which is located in TIANJIN,CHINA.

Q:Can we visit your factory ?
A:Warmly welcome once we have your schedule we will pick you up .

Q: Do you have quality control?
A: Yes, we have gained API, ISO authentication.

Q: Can you arrange the shipment?
A: Sure, we have permanent freight forwarder who can gain the best price from most ship company and offer professional service.

Q: How long is your delivery time?
A: Generally it is 7-14 days if the goods are in stock. or it is 25-45 days if the goods are not in stock, it is according to quantity.

Q:Can we get the some samples?Any charges?
A:Yes,you can get available samples in our stock.Free for real samples,but customers need to pay the freight cost.